Home › Blog › PPWR Authorised Representative: Who Needs One?
PPWR Authorised Representative: When Non-EU Companies Need One
The PPWR's main application date was 12 August 2026. That deadline is not on the horizon anymore — it passed two days ago. For most EU-based manufacturers, the immediate to-do list ran through declarations of conformity and technical files. For companies without an establishment in the EU, one requirement is easy to miss entirely, because it does not show up on a standard compliance checklist: appointing an authorised representative for extended producer responsibility (EPR) in every member state where you are selling but not established.
Skip it, and the consequence is not a warning letter — it is that you cannot legally place your packaging on that member state's market at all.
Under the PPWR (Regulation (EU) 2025/40), a "producer" that is not established in a given EU member state but makes packaging or packaged products available there for the first time — directly to end users — must appoint, by written mandate, an authorised representative for EPR in that state. This applies to non-EU companies and to EU companies selling cross-border alike, and it has applied since 12 August 2026. If an EU-based importer already receives your goods and places them on that market, the importer typically carries the producer role instead, and you may not need a separate representative for that channel.
What a PPWR authorised representative actually is
The PPWR contains two different representative roles, and mixing them up is the most common source of confusion — including in some compliance guidance already circulating online.
| Authorised representative for EPR (Article 45) | General authorised representative (Article 17) | |
|---|---|---|
| Appointed by | The producer | The manufacturer |
| Required in | Each member state where the producer is not established but makes packaging available for the first time | Any member state, at the manufacturer's discretion |
| Core job | Registers the producer with the national packaging register, joins a producer responsibility organisation (PRO), submits packaging data reports, pays EPR fees | Holds a copy of the declaration of conformity and technical documentation, responds to authority requests |
| Status | Mandatory where the trigger conditions apply | Optional for EU companies; often required in practice for non-EU manufacturers |
| Liable for | EPR registration, reporting, and fee obligations within the mandate's scope | Document custody and cooperation with authorities — not the underlying conformity of the packaging |
Both roles are distinct from the authorised representatives used under other EU frameworks. If your company already has one for REACH, CE marking, or the General Product Safety Regulation, that appointment does not cover PPWR obligations — you need a separate written mandate specific to packaging EPR.
This article focuses mainly on the Article 45 EPR representative, since it is the one with the harder trigger and the harder consequence for getting it wrong.
Do you need one? The trigger, in plain terms
The legal trigger sits in Article 3(1), points (15)(c) and (d), which define who counts as a "producer" for EPR purposes. Strip out the cross-references and it comes down to two conditions, both of which must be true:
- You make packaging, or a packaged product, available for the first time on the territory of an EU member state, directly to end users — including through distance selling, your own webshop, or a marketplace listing.
- You are not established in that member state.
If both are true, you need a written-mandate authorised representative for EPR in that specific member state — regardless of whether your company is based outside the EU or simply based in a different EU member state and selling cross-border.
A few worked examples:
- A US supplements brand ships bottled products directly to German consumers through its own website. It has no German establishment. It needs an AR for EPR in Germany.
- A UK electronics brand sells through its own EU-facing storefront into France, Italy, and Spain. It needs an AR for EPR in each of those three states — one per country, unless a single provider's mandate covers all three.
- A company established in the Netherlands sells cross-border directly to consumers in Poland. Even though it is an EU company, it is not established in Poland, so the same rule applies there.
When you probably do not need a separate one
If you sell to an EU-based company — a distributor, wholesaler, or importer — rather than directly to the end consumer, that EU-based buyer typically takes on the producer role for EPR purposes in that market, because it is the one placing the goods on the market there. In that structure, you generally do not need your own authorised representative for that sales channel.
The catch is that most real supply chains are mixed: some volume goes through an EU importer, some goes direct via e-commerce. You need to map this channel by channel, market by market — not assume one answer covers your whole business. Our guide to who must comply with the PPWR breaks down the manufacturer/importer/distributor roles in more depth, and our guide for US sellers navigating the PPWR works through this specifically for US-based exporters.
What the authorised representative actually does
Once appointed, an EPR authorised representative carries out the tasks specified in the written mandate. In practice, that usually spans:
- Registering the producer in the national packaging producer register for that member state.
- Joining, or coordinating membership with, a producer responsibility organisation (PRO) — the body that organises collection, sorting, and recycling of packaging waste in that country.
- Submitting periodic packaging data reports — volumes, materials, and weights placed on the market — using data the producer supplies.
- Paying EPR fees, calculated by material type, weight, and (from 2030 onward) recyclability grade.
- Keeping documentation available for national market surveillance authorities and cooperating on any corrective action if non-conforming packaging is identified.
What it does not cover: the underlying conformity of your packaging. The declaration of conformity and technical documentation remain the manufacturer's and importer's responsibility — see our guides to the PPWR declaration of conformity and PPWR technical documentation. An EPR representative registers and reports; it does not certify that your packaging meets design requirements.
How to appoint an authorised representative
Article 45 requires a written mandate. At minimum, that document should set out:
- Scope — which member state(s) it covers and which EPR tasks the representative is authorised to perform.
- Duration — start date, and either an end date or clear termination conditions.
- Data exchange terms — your obligation to supply accurate packaging volume and material data on a schedule that lets the representative meet national reporting deadlines.
- Fee responsibility — who funds EPR fees, PRO membership costs, and any service charges.
- Termination and transition provisions — notice periods and how continuity of registration is handled if you switch providers.
Companies can appoint an in-house EU entity (if they have one with the operational capacity to handle registrations and reporting) or a third-party AR service. Several providers offer EU-wide coverage rather than requiring a separate appointment per country, which is usually the more practical route for companies selling into multiple member states — pricing is generally structured per country, on top of the underlying EPR fees themselves, which the PPWR consultant cost guide discusses in the context of budgeting for compliance more broadly.
Liability if you skip it
The consequence is not calibrated as a fine-first system. A producer that has not appointed a required authorised representative for EPR cannot legally place packaging on that member state's market. In practice, national authorities can also impose penalties for failure to register or report, and — for goods entering via a border — non-compliant shipments can be refused entry, the same enforcement lever described in our guide to PPWR penalties. Because penalties are set by each member state rather than by the regulation itself, the exact fine schedule varies by country; what does not vary is the basic fact that market access itself is conditioned on having the representative in place.
Marketplaces carry their own duty here too: platforms are obliged to monitor and verify that third-party sellers have met their PPWR EPR obligations, which increasingly means marketplaces will ask sellers to prove an AR appointment before allowing a listing to stay live. If you sell through Amazon or a similar platform, treat this as a live commercial risk, not just a regulatory one.
Timeline: what's confirmed, what's proposed
The 12 August 2026 application date is not moving, and the AR requirement for non-EU companies took effect on schedule. One thing worth tracking: the European Commission has proposed suspending the AR-for-EPR obligation until 1 January 2035 — but only for producers already established within the EU. Non-EU companies are explicitly excluded from that proposal. If you are outside the EU, do not wait on this development; the 12 August 2026 requirement applies to you regardless of how the EU-based-producer proposal is eventually resolved.
PPWR authorised representative: frequently asked questions
Do non-EU companies need a PPWR authorised representative?
Yes, where they act as producer in a member state where they are not established — typically because they sell directly to end users there, including via their own website or a marketplace. If an EU-based importer already places the goods on that market, the importer usually carries the obligation instead.
Is the PPWR authorised representative the same as one used for REACH or CE marking?
No. It is a separate role specific to packaging extended producer responsibility, requiring its own written mandate, even if your company already has representatives appointed under other EU frameworks.
What happens if we don't appoint one where required?
You cannot legally place packaging on that member state's market. National authorities can also impose penalties for missed registration or reporting, set individually by each member state.
Do we need a different authorised representative for every EU country we sell into?
Only for the member states where you are not established and you sell directly to end users there. Several providers offer coverage across all 27 member states under a single relationship, which avoids appointing 27 separate entities.
If we sell through an EU-based distributor, do we still need an authorised representative?
Generally not for that channel, because the EU-based distributor typically takes on the producer role for EPR purposes in that market. You do still need one for any channel where you sell direct to EU end users without an EU-established intermediary.
Will the authorised representative requirement be delayed?
Not for non-EU companies. A proposed suspension until 2035 applies only to producers already established in the EU; it explicitly excludes non-EU companies, for whom the 12 August 2026 date already stands.
Mapping which member states trigger the authorised-representative requirement, and separating that from your declaration-of-conformity and EPR-registration workload, is exactly the kind of gap analysis a PPWR consultant runs in the first working session. If your channels are more complicated than a single direct-to-consumer market — mixed importer and direct sales, several countries, several product lines — it is worth getting that mapped properly rather than guessing.
Not sure which EU markets need a PPWR authorised representative?
We match you with a PPWR consultant who has set up EPR representation for non-EU and cross-border sellers. Free matching call. Reply within one business day.
Get matched with a PPWR consultant