Home › Blog › PFAS Limits Food Contact: 25 ppb–50 ppm, Now in Force
PFAS Limits for Food Contact Packaging: 25 ppb, 250 ppb and 50 ppm Explained
The PFAS limits for food contact packaging under the PPWR come down to three numbers: 25 ppb, 250 ppb, and 50 ppm. They have applied since 12 August 2026, they cover intentionally added PFAS, and there was no sell-through period for old stock — the cut-off has already passed.
Three numbers sound simple. In practice, each limit measures something different, treats polymeric PFAS differently, and calls for a different test. This post explains each threshold, how labs check them, and what evidence you need on file now that the rule is live.
Since 12 August 2026, food-contact packaging placed on the EU market must contain less than 25 ppb of any single targeted PFAS, less than 250 ppb for the sum of targeted PFAS (polymeric PFAS excluded), and less than 50 ppm total fluorine, which includes polymeric PFAS.
The three PFAS limits food contact packaging must meet
The PPWR — Regulation (EU) 2025/40, in force since 11 February 2025 and applying across the EU since 12 August 2026 — restricts intentionally added PFAS in food-contact packaging through three parallel thresholds. Packaging must pass all three. The full legal text is on EUR-Lex.
| Threshold | Limit | What is measured | Polymeric PFAS | Typical test approach |
|---|---|---|---|---|
| Single targeted PFAS | 25 ppb | Each targeted PFAS substance, one by one | Excluded | Targeted substance analysis |
| Sum of targeted PFAS | 250 ppb | All targeted PFAS added together | Excluded | Targeted substance analysis, summed |
| Total fluorine | 50 ppm | All fluorine in the material as a proxy for PFAS | Included | Total fluorine screening |
Why three limits instead of one? Because each closes a loophole the others leave open. Below is what each number does.
It's worth noting these PFAS limits are not the only Article 5 substance restriction in the PPWR. A separate, parallel limit caps combined lead, cadmium, mercury and hexavalent chromium in packaging and packaging components at 100 mg/kg, with its own compliance evidence expected in your technical documentation. The two restrictions are checked separately but usually belong in the same file. PFAS is one part of a broader Article 5 substances regime — see our Article 5 heavy metals and substances of concern guide for the full picture, including heavy metals.
The 25 ppb limit: any single targeted PFAS
The first threshold caps each individual targeted PFAS at 25 ppb. Parts per billion is a very small concentration — this is not a level you reach by accident through trace contamination in most cases. It is the level you exceed when a PFAS has been intentionally added to do a job, such as forming a grease barrier on paper.
Key points about the 25 ppb PFAS limit:
- It applies per substance. Every targeted PFAS in the material must individually stay under 25 ppb.
- Polymeric PFAS are excluded from this limit. They are dealt with by the total fluorine threshold instead.
- One failing substance fails the packaging. There is no averaging across substances.
The 250 ppb limit: the sum of targeted PFAS
The second threshold adds up all targeted PFAS in the material and caps the total at 250 ppb. This closes an obvious gap: without it, a formulator could use many different PFAS, keep each under 25 ppb, and still load the packaging with fluorochemistry.
The sum limit means your lab report needs the full picture, not a pass/fail on one or two famous substances. A material with several PFAS at 60–80 ppb each passes nothing here — even though no single number looks dramatic, the sum breaches 250 ppb. As with the single-substance limit, polymeric PFAS are excluded from the sum.
Total fluorine 50 ppm: the catch-all that includes polymeric PFAS
The third threshold is different in kind. Instead of looking for specific substances, it measures total fluorine in the material and caps it at 50 ppm. Fluorine is the common element in all PFAS, so total fluorine acts as a proxy for everything fluorinated — including substances a targeted method would not look for.
Crucially, this is where polymeric PFAS come back in. Fluoropolymer coatings escape the two ppb limits, but their fluorine counts toward the 50 ppm cap. In practice, a meaningful fluoropolymer coating puts far more than 50 ppm of fluorine into a material. So "our coating is polymeric" is not an exemption — it usually just moves the failure from the ppb tests to the fluorine test.
Note the units as well: ppm, not ppb. The fluorine limit is a thousand times less sensitive per unit, which fits its role as a broad screen rather than a trace-level substance test.
"Intentionally added" PFAS: what it means in practice
The restriction applies to intentionally added PFAS — fluorochemistry put into the packaging on purpose for a function. For compliance work, treat the question in two layers:
- Formulation: did you, or any supplier upstream, add a PFAS-based coating, additive, or surface treatment? Ask in writing, all the way up the chain, if you have not confirmed this already. Grease-proofing on fibre packaging is the classic case.
- Measurement: what do the numbers say? If testing shows results above the limits, you need to demonstrate compliance regardless of how the fluorine got there — and address it now, since the limits are already in force. Documented low results are also your best evidence that nothing was intentionally added.
This is why supplier declarations and test data belong together. A declaration explains intent; a test result verifies the material. Either alone is a weak file.
PFAS testing packaging: choosing the right method
Match the method to the threshold. A sensible sequence for companies still working through their portfolio:
1. Start with a total fluorine screen
Total fluorine screening is the faster, cheaper test, and it maps directly to the 50 ppm limit. A clearly low result is strong evidence the material is free of intentionally added PFAS, polymeric or not. Document it and move to the next SKU.
2. Escalate to targeted analysis where needed
If the fluorine screen is elevated, or a supplier confirms PFAS in the formulation, commission targeted analysis of individual PFAS substances. That is the only way to check the 25 ppb and 250 ppb limits properly, and it tells you exactly which substance is the problem — useful when you push the issue back to the supplier.
3. Sample where risk lives
Test food-contact surfaces and coated materials first: wrappers, moulded fibre, coated board, baking and grease-proof papers. Prioritise high-volume SKUs, especially anything that is currently shipping into the EU without a completed test file. For a plain-language overview of the ban itself — scope, dates, and the no-grandfathering rule — see our EU PFAS ban in food packaging compliance guide.
PFAS compliance documentation: what goes in the file
Since 12 August 2026 the PPWR has also required a declaration of conformity and technical documentation for each packaging type. Your PFAS evidence is part of that file, and it needs to be in place now, not pending. For food-contact packaging it should hold:
- Supplier declarations confirming no intentionally added PFAS, per material.
- Test reports — fluorine screens and any targeted analysis — tied to specific SKUs and dates.
- Your sampling logic: which materials you tested, which you covered by declaration, and why.
- Change records: what you reformulated, when, and the verification afterwards.
Remember who carries the duty. The rules cover all packaging placed on the EU market, importers are responsible for what they bring in, and border officials can now refuse non-compliant goods. Penalties are set by each member state. If a material fails, your next step is substitution — our guide to PFAS-free packaging alternatives compares the realistic options. Food and drink companies should also read our PPWR guide for food and beverage, since PFAS is only one of several contact-sensitive duties landing on the sector. All other deadlines are on our deadlines overview, and the full library is in the PPWR blog.
PFAS limits for food contact packaging: frequently asked questions
What is the 25 ppb PFAS limit in the PPWR?
Since 12 August 2026, no single targeted PFAS may exceed 25 ppb in food-contact packaging. Polymeric PFAS are excluded from this limit but are still counted in the separate 50 ppm total fluorine limit. The restriction applies to intentionally added PFAS.
What does the 250 ppb PFAS sum limit mean?
The 250 ppb limit caps the combined total of all targeted PFAS in the material. Even if every individual substance stays below 25 ppb, the sum of them all must stay below 250 ppb. Polymeric PFAS are excluded from this sum.
Does the 50 ppm total fluorine limit include polymeric PFAS?
Yes. The 50 ppm total fluorine threshold includes polymeric PFAS. It acts as a catch-all: packaging that passes both ppb limits can still fail if total fluorine, including fluoropolymer coatings, exceeds 50 ppm.
How do labs test packaging against the PFAS limits?
A common approach is two stages: a total fluorine screen first, which is fast and checks against the 50 ppm threshold, then targeted analysis of individual PFAS substances where needed to check the 25 ppb and 250 ppb limits. Supplier declarations plus spot-check testing covers most portfolios.
Do the PFAS limits apply to packaging made before August 2026?
Yes. There is no grandfathering. Stock exceeding the limits cannot be placed on the EU market since 12 August 2026, whenever it was manufactured. Importers face the same rule, and non-compliant goods can be refused at the EU border.
What PFAS compliance documentation do I need?
Since 12 August 2026 the PPWR has required a declaration of conformity and technical documentation per packaging type. For food-contact packaging, that file should hold your supplier PFAS declarations, formulation statements, and test reports showing the 25 ppb, 250 ppb and 50 ppm limits are met.
The PFAS limits for food contact packaging are strict, layered, and arrived with no grace period. If you haven't already, verify each threshold, test in the right order, and get the evidence into your conformity file now — the deadline to have this done has already passed, so any gap is a live exposure rather than a planning item.
Not sure your packaging passes 25 ppb, 250 ppb and 50 ppm — right now?
We match you with a PPWR consultant who has done this work in your industry. Free matching call. Reply within one business day.
Get matched with a PPWR consultant